Known limits

Known limits and roadmap

NativeCAM is version 0.1. This is what doesn't work yet, mirrored from the repository's known limits.

Testing on real machines

  • Only Avid Mach4 output has run on a real machine. Every other controller's output follows its documentation (and, for Centroid, Avid's EX posts) and should be treated as unverified: run the acceptance test in check mode where there is one, then air-cut.
  • Run-time estimates use each controller's planner model and look-ahead, with acceleration from your controller's settings when you import them and labelled class defaults otherwise. They haven't been timed against a real machine yet.
  • NativeCAM was written almost entirely by an AI coding assistant and hasn't had a line-by-line human review. Until it has more hours on real routers, treat every program it makes as unproven: check the toolpaths in the simulator, read the G-code, and air-cut before cutting material.

Toolpaths

  • 3D finishing uses one raster direction per toolpath; add a second at 90° for cross-hatching. No waterline or pencil passes yet.
  • V-bit and bull-nose 3D finishing use the height-grid drop-cutter; the exact triangle drop-cutter covers ball and flat bits only.
  • No nesting or plasma (THC) support yet.
  • Leads keep clear of the shapes in their own toolpath, clamps and the material edge, but not of parts cut by other toolpaths.
  • A corner's own relief choice is tied to its place on the shape: change the shape so that corner moves (resize a rectangle, say) and the choice no longer applies, and Checks says so. A corner relief can break through a wall thinner than the bit's radius if the other side of it belongs to another toolpath.

Rotary

  • Rotary (4th-axis) work is indexed only. Profile, pocket and drill operations repeat at a list of angles on a round blank, or on a square bar at multiples of 90°.
  • The posts turn the blank with G00 A at safe Z for Avid Mach4, LinuxCNC, grblHAL, Centroid and Buildbotics. Only an A axis along X is supported.
  • The simulation turns the blank at a nominal 90° a second, and the run-time estimate doesn't count the turns yet.
  • V-carve, 3D and wrapped (continuous) rotary toolpaths aren't supported. Rotary projects are saved as format 3.

Files

  • EPS isn't supported. A PDF clipping mask made from live text isn't applied; convert the text to outlines first.
  • Vectric's older .tool libraries aren't supported. Tapered ball nose, form, dovetail, roundover and thread bits in imported libraries are listed as not imported.
  • Tapping and boring cycles (G74, G76, G84, G87, G88) in imported G-code aren't simulated; drilling cycles are. Imported G-code with A words is simulated as if the part never turned, with a warning.
  • Mach3 profiles and Masso's .htg files are refused by the controller-settings import, with the reason.

Packaging

  • There's no packaged or notarised download yet. Build it from source.
  • NativeCAM needs Apple silicon and macOS 14 or later.

Bug reports, results from your own machine and code reviews are all very welcome: open an issue, or see Develop to contribute.